7
Luma 300 Series Mini Dome IP Camera
Installation Without an NVR
Install and Run the Luma Utility
Use the Luma Utility to locate your camera and set it up.
Visit your product page at SnapAV.com and download the Luma Utility installer from the
Support tab.
You must use v3.0.0.53 build 20170426 or later! Earlier versions of the utility
will not work!
Run the installer. You can click through and accept the defaults.
Pre-Installation Camera Configuration
You’ll find it easiest to connect the camera directly to your PC, making most adjustments to
the camera from the convenience of your table (prior to physical installation), rather than
from atop a ladder.
Connect the camera to your PC and run the Luma Utility. It searches for attached Luma
Surveillance devices. If your camera does not appear, check the connection, ensure the camera
is powered up, then click the
Refresh
button.
