12
Scale
Adjust the size of the model using values
entered in millimeters or percentages.
Snap Scaling uses increments of 10%
when using the red/blue/green axis boxes
to drag and scale. Uniform scaling is
selected by default, to keep the 3D model
aspect ratio the same.
Restore the original scaling by pressing
the
Reset
button.
The
Scale To Max
button will enlarge a
model to fill the maximum build area.
Rotate
Orient your model along all three axes by
clicking the
Rotate
button. Three colored
circles will surround your model, centered
along the model midpoint. The Blue circle
will allow you to rotate around the Z axis.
The Green circle is used to rotate around
the Y axis. The Red circle will rotate around
the X axis.
The
Lay Flat
button will attempt to place
the model onto the print surface using the
flattest portion.
The
Snap Rotation
button will use 15° increments.
Restore the original orientation by pressing the
Reset
button.
Mirror
Use the red, green, and blue arrows to
mirror the model along that axis.
Right click
using your mouse and select
Reset All Model Transformations
to undo
these changes.
Summary of Contents for Mini 2
Page 26: ...26 Filament Guide ...