Lukas S 312 E2 Instruction Manual Download Page 39

Page: 39 / 40

13.3 Power supply

NOTE:

Pay strict attention to the separate operating instructions for the power supply.

13.2 Battery charger

Only the "eDRAULIC Power Pack Charger" may be used for the lithium-ion batteries.

NOTE:

Pay strict attention to the separate operating instructions for the battery charger.

The eDRAULIC devices have a specially developed power supply with which the devices

can be directly connected to the power grid. The power supply converts the alternating

current from the power grid into direct current, which means that it can be used instead of

the battery.

Structure:

There is an adapter on one side of the power supply which can be simply inserted into

the connection slot of the devices and locked. The other side has a mains plug. Both are

connected by a cable. The mains plug is a Schuko plug with Protection Classification IP

68 or a US plug. The integrated filter is appropriate for the conversion of AC voltage to DC

voltage.

Adapter

Mains plug

Cable

Filter

Cable

Summary of Contents for S 312 E2









































Search results

Summary of Contents for S 312 E2

Reviews:

Related manuals for S 312 E2

Brands by name

Popular brands

Lukas S 312 E2, Instruction Manual

Search results

Summary of Contents for S 312 E2

Reviews:

Related manuals for S 312 E2

Brands by name

Popular brands