Lukas LC 99, Operating Instructions Manual, Page: 6 / 28

6
In the event of malfunctions,
immediately deactivate the
equipment and secure it.
Repair the fault immediately.
Do not carry out any changes
(additions or conversions)
to the equipment without
obtaining the approval of
LUKAS beforehand.
Observe all safety and danger
information on the device and
in the operating instructions.
All safety and danger
information on the device
must always be complete and
in a legible condition.
Any mode of operation which
compromises the safety and/
or stability of the device is
forbidden!
Observe all intervals
for recurring tests and/
or inspections that are
prescribed or stated in the
operating instructions.
Safety devices must never be
disabled!
The maximum permitted
operating pressure noted on
the equipment must not be
exceeded.
Make sure before switching
on/starting up the device and
during its operation that this
will put no one in danger.
Only genuine LUKAS
accessories and spare parts
are to be used for repairs.
Please ensure that, when
working with this equipment
or during transportation of
such, you don’t get caught up
in the looped hoses and trip.
When working close to live
components and cables,
suitable measures must
be taken to avoid current
transfers or high-voltage
transfers to the equipment.
Please note that, when
cutting or spreading, tearing
or breaking can cause
falling material, or sudden
removal of such can cause
it to suddenly catapult off:
necessary precautions need
to be taken.
The build-up of static charge
and therefore possible
sparking must be avoided
when handling the device.
Only touch any broken-off
parts or the cut-off parts
wearing protective gloves,
since the torn / cut edges can
be very sharp.