background image

User’s Manual

 ... 5

... Lukas Blackbox

1. Attentive Items in Usage

1.

Never leave it in a hot or cold place for a long time.  

 

 

 

If it is exposed to direct sunlight in summer or cold weather in winter for a long time, it may cause 

a malfunction or disorder. When not using the product, be careful for its storing temperature. 

2.

Neither dismantle this product nor alter its structure arbitrarily. When it is dismantled or altered 

arbitrarily, A/S is not available. For the check and maintenance, please contact seller or 

manufacturer.

3.

Do not alter the cigar jack cable nor cut it. It may cause damage in the product and the car. 

The damage of product and car due to it shall be borne by the user. 

4.

Do not touch the power part of the product with a wet hand. And let the water not enter into the 

When cleaning the product, use a soft dry cloth instead of water, volatile agent or detergent.

  

5.

Never impose a heavy impact on it and never inject an alien material into it. Excessive impact, 

load or injection of alien material can cause its malfunction.

6.

Keep dusts and impurities away from the lens of camera.  

 

 

 

And do not place other things near the installed product, for they can be reflected on the 

window and seen by the product. 

7.

Do not manipulate the product during driving. It may cause a car accident. 

8.

Attach this product so as not to fall during driving.  

 

 

Otherwise, it may not work properly or fall to obstruct the safe driving. 

9.

.  

 

We are not responsible for all the product damages and other losses due to the use of 

10.

The compatibility is not guaranteed for other devices and accessories that were not supplied 

by our company. The responsibility of product disorder due to this shall be borne by the user.

11.

Do not operate the blackbox for a long time while the motor is not running. The car battery 

may be discharged and the motor cannot start on. 

12.

In case that the product has been attached for a long time or exposed to the vibrant driving 

condition, check the position of product and the angle of camera.

13.

When the surrounding brightness changes as radically as entering/exiting a tunnel or the 

background light is too strong or there is no light around it at night, the quality of recorded 

image may be degraded. 

14.

In the car with an excessive tinting on the windscreen, its recorded image may be unclear or 

distorted.

15.

In an accident with the impact lower than a certain amount, the event data may not be 

recorded.  

 

 

 

And at a big accident, the image may not be recorded due to the cut-off of power. 

16.

Never put out the SD card by force during the recording. Be sure to turn off the power before 

taking out the SD card. If the SD card is removed while the power is on, it may damage the 

17.

Never pull out the power cable during the use of product. It may damage the product. Never 

18.

Format the SD card at least once a week (recommended for 8GB product). As the memory 

card of blackbox repeats the saving and deleting, the SD card usually gets a heavy load. The 

is about 180 days after purchase. Qrontech has no responsibility for the recording failure due 

to the use of expired SD card.

19.

For the protection of machine and the stable recording, it has the function to stop the 

operation at the high temperature. At purchase, it is set to stop the recording in the hot 

environment higher than 65°. (When 'Use of High Temperature Safe Mode' is set in the PC 

viewer program environment.)

Summary of Contents for CUTY LK-6200












Reviews: