Lukas AMIN 30 BSH, Operation Instructions Manual

Page: 3 / 18

13 - AMIN 30 BSH - Stand: 21.11.2008
1. Introduction
The AMIN 30 BSH is a pneumatic power tool reflecting state-of-the-art technology.
It is driven by a vane air motor using compressed air.
The integral speed controller keeps the rotation at a constant speed.
With the belt grinding arm mounted the power tool is suitable for radial grinding with
grinding belts only.
After demounting the belt grinding arm the power tool can be used as an angle die
grinder with collets.
In that case both tungsten carbide burrs and mounted points can be used
economically with the power tool.
The vibration and sound values specified in the technical data were measured
according to EN 28662-1 and EN ISO 8662-13 as well as prEN ISO 15744.
Prior to using the power tool you should become familiar with
the operation instructions.
The power tool must not be commissioned before the safety
information for the operator has been read.
2. Technical Data
Type: belt grinder with lever valve
max. RPM: 30.000 min -1 - 10%