16
- AM 07/100 GH -
Stand: 27.10.2008
operation. The power tool must only be connected using a pressure control valve.
Make sure that loose clothing and long hair are not ensnared by the power tool when
in operation.
To protect the operator, he or she must wear goggles and ear protection during
operation. It is recommended that gloves and suitable protective clothing is worn.
Depending on the materials to be machined, personal protection equipment and dust
extraction may have to be used.
All operators using the power tool must abide by the accident prevention regulations
as well as the FEPA safety code.
7. Maintenance Instructions
Maintenance work on this power tool may only be carried out by specialists.
After each maintenance check, the power tool must be tested for speed and
vibrations.
The power tools speed must be checked at regular intervals using suitable inspection
equipment.
Compressed air hoses must be checked at regular intervals for damage and leakage.
Damaged hoses must be replaced.
The pressure reducer must be checked at regular intervals and topped up with oil as
needed.
