LUJAN USA SNIPER 5412a, Manual, Page: 29 / 32

VERTICAL CENTERLINE
AHEAD OF LEFT
HEADLAMP
VERTICAL CENTERLINE
AHEAD OF RIGHT
HEADLAMP
CAR AXIS
HEIGHT OF LAMP CENTERS
HIGH-INTENSITY ZONE (SHADED AREA) OF A PROPERLY AIMED
ON THE AIMING SCREEN IN FRONT OF VEHICLE
UPPER BEAM
AIMING the UPPER BEAM
ALTERNATIVE PROCEDURE
The same procedure may be done by checking the aimer using the high beam instead of the
low as a reference.
AIMINGHIGHBEAMHEADLAMPS
High beam headlamps and auxiliary driving lights are aimed so that the center of the high-
intensity zone is located at the horizontal and straight ahead vertically.
CHECKING THE AIMER
Once the beam is aligned, place the aimer in front of one of the lights, as described in the
instructions, and check if the projection of the beam on the internal screen is the same.
Tolerances are the same as described in the previous page.
Calibrating the Aimer - Page 27