TROUBLESHOOTING
Problem
Possible cause
Remedy
You cannot activate or
operate the appliance.
The appliance is not
connected to an electrical
supply or it is connected
incorrectly.
Check if the appliance is correctly
connected to the electrical supply.
Refer to
“Electrical connections”
chapter.
The fuse is released.
Make sure that the fuse is the
cause of the malfunction.
If the fuse releases again and again,
contact a qualified electrician.
it’s been more than
10
seconds
from the switching
on of the appliance.
Activate the appliance again and
set the heat setting in less than
10
seconds.
You touched 2 or more
sensor keys at the same
time.
Touch only one sensor key.
Pause function operates.
Refer to
“Using the cooktop”
chapter.
There is water or fat stains
on the control panel.
Clean the control panel.
The hob deactivates.
You put something on the
sensor key ON-OFF.
Remove the object from the sensor
key.
Residual heat indicator
does not come on.
The zone is not hot because
it operated only for a short
time.
If the zone operated sufficiently
long to be hot contact an
Authorised Service Centre.
Automatic Warm Up
function
does
not
operate.
The zone is hot.
Let the zone become sufficiently
cool.
The highest heat setting is
set.
The highest heat setting has the
same power as the function.
The heat setting changes
between two levels.
Power
management
function operates.
Refer to
“Using the cooktop”
chapter.
The sensor keys become
hot.
The cookware is too large
or you put it too near to the
controls.
Put large cookware on the rear
zones if possible.
a 4
comes on.
Safety Switch operates.
Deactivate the appliance and
activate it again.
comes on.
The Child Lock function
operates.
Refer to
“Using the cooktop”
chapter.
4
comes on.
Water or cooking utensils
above the control panel.
Remove the objects from the
control panel.
11
Summary of Contents for SANREMO S-DDH3
Page 2: ...2 1 2 mm 2 3 2...
