9
LR510
Operation of the LR510
• Open the battery compartment, insert the battery pack with the exposed metal ends of
the battery pack aligned with the + & - terminals (see pictures on right). Close the battery
compartment.
Charging the batteries
• Before using the LR510, fully charge the batteries.
• Connect the battery charger/mains unit to a mains
source and plug into the socket. Please only use the
charger/mains unit supplied with the device. If a differ-
ent one is used, the warranty will become void.
• If the LED blinks constantly, either the batteries must
be exchanged or recharged.
Insertion of batteries in the detector
• Remove the battery cover (9) and insert the batteries as shown by the installation symbol,
ensuring that the polarity is correct. Then replace the cover.
• To extend battery life, the receiver switches off automatically after about 5 minutes if not
used.
Note:
Do not expose batteries to excessive heat such as sunshine, fire, etc. Dry batteries
must not be recharged. Used batteries must not be disposed of as household waste.
Please take them to a collection point for used batteries or for special waste. Ask your
local authority for further details.
