Operating Manual V8.2/03.2017
Non Invasive Road Sensor
G. Lufft Mess- und Regeltechnik GmbH, Fellbach, Germany
33
14.5 Checking the Sensor Adjustment
Using the UMB Config Tool, the adjustment of the sensor can be checked. The following
conditions must be met for the period of checking (10 minutes):
Absolutely dry road
No traffic jam on the road
The last restart of the sensor must be at least 15 minutes ago
To verify the adjustment chose the menu "Options"
"NIRS31-UMB"
"NIRS31-UMB
check adaption" in the UMB Config Tool.
Check the sensor ID and, if necessary, change it to the ID of the Sensor; then click the
"Check Status" button:
After the test, a message appears stating whether the adjustment is correct. If
it’s not, a new
adaptation can be performed.
14.6 Generate Status File
To generate a status file chose the menu "Options"
"NIRS31-UMB"
"NIRS31-UMB
Generate Status File" in the UMB Config Tool.
Follow the instructions.
For further analysis of the sensor function, you can send this file, if it is necessary, to our
hotline.
