60
CHAPTER 4. SETUP MODE
Use the UNIT button to select the appropriate parameter, and use the MODE and ON/AUD
buttons to scroll through the parameter options.
Unit 1 - COUNT Alarm 3 -
Upon entry into Unit 1 Count Alarm 3, one of the following pa-
rameters will be selected (flashing).
• Rightmost Digit (0-9)
• Middle Digit (0-9)
• Leftmost Digit (0-9)
• Multiplier with all digits flashing (adjustable from x.xx
µ
to xxx M depending on unit
selected)
Use the UNIT button to select the appropriate parameter, and use the MODE and ON/AUD
buttons to scroll through the parameter options.
Unit 1 - DOSE Units and Minimum Display -
Upon entry into Unit 1 RATE/MAX Units Max-
imum Display, one of the following parameters will be selected (flashing).
Note:
Select Unit
first before selecting multiplier.
• Multiplier with all digits flashing (adjustable from x.xx
µ
to xxx M depending on unit
selected)
• Unit (off, d, c, Rem, R, Sv)
Use the UNIT button to select the appropriate parameter, and use the MODE and ON/AUD
buttons to scroll through the parameter options.
Unit 1 - DOSE Alarm 1 -
Upon entry into Unit 1 Dose Alarm 1, one of the following parame-
ters will be selected (flashing).
• Rightmost Digit (0-9)
• Middle Digit (0-9)
• Leftmost Digit (0-9)
• Multiplier with all digits flashing (adjustable from x.xx
µ
to xxx M depending on unit
selected)
Use the UNIT button to select the appropriate parameter, and use the MODE and ON/AUD
buttons to scroll through the parameter options.
Unit 1 - DOSE Alarm 2 -
Upon entry into Unit 1 Dose Alarm 2, one of the following parame-
ters will be selected (flashing).
Ludlum Measurements, Inc.
