Art.Nr.: 360000; Rev. 0; Stand
15.05.2020
Seite
2
von
4
Slat lifter Climber
operation manual
About this guide
Thank you for your purchase! With the manual CLIMBER you have acquired a high quality product. To enjoy the comfort and safety of the
manual CLIMBER, please note the following:
1 Handling of the assembly and operating instructions
Read all of the instructions and safety instructions supplied with the device carefully before use.
Please keep the instructions carefully.
Pass the instructions on to any subsequent owner or user of the product.
The individual assembly steps can be found in the assembly instructions.
2. Security
2.1 Principle
Please understand that the manufacturer cannot accept any liability or guarantee for damage and consequential damage caused by
failure to observe the operating and assembly instructions.
2.2 Safety instructions
Keep small parts and plastic films out of the reach of babies and customers so that they cannot reach children and can be taken. Keep
the plastic film away from babies and children to avoid suffocation.
warning
Risk of injury in the area of the levers!
Do not reach into the area of the glass holders during the opening or closing movement, there is a
risk of injury!
danger
Risk of injury when opening or closing the cabinet!
People, especially children, who are sitting or standing on the worktop can fall or be injured from
the worktop when opening and closing the slats.
Supervise children who are in the room so that they do not play with the closet.
Always keep the blind closed to avoid impact injuries.
Danger to life from electric shock
Never open the motor housing. There is danger to life from electric shock!
Always follow the instructions in the installation instructions for wall mounting
Always make sure to use suitable fastening material
Only mount the lifter in dry, closed rooms
The cabinet must not be overloaded
Clean surfaces only with a damp, lint-free cotton cloth. Always rub cleaned surfaces dry.
Excessive exposure to dust from the surroundings can lead to malfunctions or poor running properties of the blind
Do not strain the top shelf. Loading can lead to deflection
Only a qualified specialist may install the CLIMBER slat lifter and carry out the wiring!
The device may only be connected to a power supply system whose voltage, current type and frequency are listed with the
specifications in the technical data on last page.
To protect the sensor field against unintentional actuation, we recommend connecting the CLIMBER slat lifter to a switchable
socket.
Make sure that no moisture can penetrate the motor and the drive unit.
