50
Floppy Drive
Values
Meaning
Enabled
This will allow use of a floppy drive.
Onboard
FDD
Controller
Disabled
If you do not need a floppy drive, set this item to disabled.
COM ports (Serial Ports)
Values
Meaning
Auto
The bios will automatically use serial ports.
Disabled
If you do not need the serial port in question, set this item to
disabled.
3F8/IRQ4
2F8/IRQ3
3E8/IRQ4
Onboard
serial port 1 /
2
2E8/IRQ3
Set an IO address and an IRQ to be used by serial ports.
IR Control
Values
Meaning
Normal
IrDA
Allows use of the IR port in IrDA mode.
ASKIR
Allows use of the IR port in ASKIR mode.
UART Mode
Select
SCR
Allows use of the IR port in SCR mode.
Half
Select if your IR device supports Half duplex only.
UR2 Duplex
Mode
Full
For IR devices that support full duplex.
Paraller Port (Printer Port)
Values
Meaning
Disabled
Disables use of the parallel port.
3BC/ IRQ7
378/ IRQ7
Onboard
Parallel Port
278/ IRQ5
Select and IO Address and an IRQ to be used by the parallel
port.
SPP
Enableds use of SPP devices.
EPP
Enables use of EPP devices.
ECP
Enables use of EPP devices.
Parallel Port
Mode
ECP
Enables use of ECP + EPP devices.
ECP mode
use DMA
1 or 3
Select either DMA channel 1 or 3 (This is only relevant if ECP
was selected above). Default is channel 3.
