6VPM1 Main Board
68
6. Hard disk install failure
The system can not find or initialize the hard drive controller or the drive. Check
if the controller is set correctly. If no hard disk is installed,
“Hard drive
selection”
must be set to
“none.”
7. Keyboard error or no keyboard present
This means the system can not initialize the keyboard. Check if the keyboard is
plugged well and be sure no keys are pressed during power on self test.
8. Memory test fails
There will be more information to specify the type and location of the memory
error.
9. Primary master hard disk fail
The BIOS find an error in the primary master hard disk drive.
10. Primary slave hard disk fail
The BIOS finds an error in the primary slave hard disk drive.
11. Secondary master hard disk fail
The BIOS finds an error in the secondary slave master hard disk drive.
12. Secondary slave hard disk fail
The BIOS finds an error in the secondary slave IDE hard disk drive.
Summary of Contents for 6VPM1
