6VPM1 Main Board
48
PnP OS Installed
:No
(default) -- OS will not recognize PnP devices
:Yes --
OS will arrange the setup of PnP devices
Reset Configuration Data
: Disabled
(default)
: Enabled---
to reset
“Extended System Configuration Data(ESCD)
when you
exit setup if you have installed a new add-on card and the system reconfiguration
has caused such a serious conflict that the operating system can not boot up.
Resources Controlled By
: Manual
The table will show the below items:
“Reset Configuration Data, IRQ-3
assigned to, DMA-0 assigned to.”
The user can adjust the shown items as
required.
: Auto
(default)
The table will not show the above items, and the system will automatically assign
the above setup.
PCI/VGA Palette Snoop
: Enabled
: Disabled(default)
Assigned IRQ for VGA
: Enabled (default)
: Disabled
Assigned IRQ for USB
: Enabled (default)
: Disabled
Summary of Contents for 6VPM1
