Intel 810 Main Board
67
be given every time the system boots, if set to setup, the password must be given only
when you want to enter the BIOS Setup.
The user password has the same functionality, with the only difference that anybody
logging in with the user password may only change the user password when entering the
BIOS Setup page. All other items in the BIOS Setup will be disabled (unchangeable).
When both passwords are disabled, anyone may access all BIOS Setup program functions.
Setting the password
To set the Supervisor password, select the Set Supervisor Password item in the main BIOS
Setup Menu. Now a dialog will pop up asking you to enter a password.
CMOS SETUP UTILITY Copyright © 1984 – 2001 Award Software
"
Standard CMOS Features
"
Frequency/Voltage Control
"
Advanced BIOS Features
Load Optimized Defaults
"
Advanced Chipset Features
Set Supervisor Password
"
Integrated Peripherals
Set User Password
"
Power Manag
xit Setup
"
PnP/PCI Conf
Enter Password:
ithout Saving
Now you can enter your password, after entering the password the menu will pop up again
and will ask you to reconfirm the password. After entering and pressing [enter] the
password will be stored to CMOS RAM and the password will be enabled.
Disabling the password
To disable the password, simply press [enter] without entering any other letters or numbers. This will
disable the password, the BIOS will tell you by displaying the following dialog:
CMOS SETUP UTILITY Copyright © 1984 – 2001 Award Software
"
Standard CMOS Features
"
Frequency/Voltage Control
"
Advanced BIOS Features
Load Optimized Defaults
"
Advanced Chipset Features
Set Supervisor Password
"
Integrated Peripherals
Set User Password
"
Power Manag
xit Setup
"
PnP/PCI Conf
Password Disabled!!!
Press any key to continue
ithout Saving
