Lucky Star 6B810 User Manual Download Page 66

Page: 66 / 81

Intel 810 Main Board

DPMS
support

If your monitor supports DPMS, it can be switched off through
that.

Yes

Video Off In
Suspend

Stop Grant

Suspend Type

PwrOn
Suspend

Modem IRQ

Values

Meaning

This disables the modem IRQ

Modem Use
IRQ

3 - 11

Select an IRQ line that will be assigned to your modem here.
Choose from: 3 (default), 4, 5, 7, 9, 10, 11.

Power Button

Values

Meaning

Instant-off

Switches the system off immediately when pressing the power
button.

Soft off by
power button

Delay 4 Sec

This requires you to press the power button for at least 4
seconds before the system switches off.

Wake Events

Values

Meaning

Enabled

Allow the system to wake up on a PCI card IRQ.

Wake-Up By
PCI Card

Disabled

Will not allow the system to wake up on a IRQ form a PCI card.

Resume By Alarm

Values

Meaning

Enabled

You can set the date and time on RTC (real-time clock) alarm
awaken a system which has been powered down.

Resume By
Alarm

Disabled

Disabled this function.

Date Setting

Values

Meaning

Summary of Contents for 6B810


















































































Search results

Summary of Contents for 6B810

Reviews:

Related manuals for 6B810

Brands by name

Popular brands

Lucky Star 6B810, User Manual

Search results

Summary of Contents for 6B810

Reviews:

Related manuals for 6B810

Brands by name

Popular brands