Dear customer,
Thank you for choosing to purchase
a Lucky brand product. Thanks to its
technology, design and operation and the
fact that it exceeds the strictest quality
standards, a fully satisfactory use and
long product life can be assured.
When using an electrical appliance,
basic safety precautions should always
be followed:
1. Carefully read all instructions before
using appliance.
2. Do not immerse in water or other
liquids - do not use whilst bathing, with
wet hands, or over a filled sink. If the
appliance falls into water, disconnect the
power plug immediately be- fore remov-
ing it out of the water.
3. This appliance is only for domestic
use, not for industrial or professional use.
It is not intended to be used by guests
in hospitality environments such as bed
and breakfast, hotels, motels, and other
types of residential environments, even
in farm houses, areas of the kitchen staff
in shops, offices and other work environ-
ments. This appliance is not intended
for use by persons (including children)
with reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning use
of the appliance by a person responsible
for their safety. This appliance is not a toy.
Children should be supervised to ensure
that they do not play with the appliance.
4. Unplug the appliance from outlet when
not in use and before cleaning. Do not
leave appliance unattended when it is
operating.
5. If the supply cord is damaged, it must
be replaced by the manufacturer or its
service agent, or similarly qualified person
in order to avoid a hazard.
6. Use appliance only for its intended
profes- sional use, namely drying hair.
7. This appliance is protected againts
overheat- ing - it stops automatically if
the air intlet is covered. After a short time
cooling, the appli- ance can be restarted.
8. To clean your appliance after use,
disconnect the dryer first and wipe with a
slightly damp cloth and wipe dry.
9. Do not use to dry synthetic hair or wigs.
INSTALLATION PICTURE AND
DESCRIPTION
1. Installation
1. Stainless steel, which
is placed at the top of the
small hole, will be set at the
end of the hanging arms.
2. The heads of the machine
will be inserted into the
haning arms to absolutely
coincide.
3. Four small steel balls will
be moistened with oil. Put
the small balls at the end of
the hanging arms.
4. Stainless steel will be
dragged into the end of the
hanging arms, so that it can
combine with the heads of
the machines. Lastly, tighten
it firm with the small nuts.
Summary of Contents for LA BELLE WHDDLX1A
Page 7: ......
