Step 1
Place
BACK PANEL (E)
face
down on a clean,flat surface,
grooves facing up, (
NOTE: you
may want to use a towel or some
kind of padding to prevent damag-
ing the woodgrain surface during
assembly
).
Slide
SIDE PANEL (CR)
into
place by inserting it into the
groove on the back panel.
END TABLE ASSEMBLY
Approximate assembly time with 1 person: 30 minutes
Step 2
Slide
TABLE BOTTOM (B)
into place making sure the
panels are flush with each
other and the table bottom is
resting in the grooves. Install
3
WOOD SCREWS (F)
into
the back stabilizer bar (on the
underside of the crate), and 1
into the side stabilizer bar (on
the underside of the crate),
until screw heads are flush
with bar.
Step 3
Place
TABLE TOP (A)
face
down on clean flat surface.
Align assembled panels with
table top. Secure with wood
screws, along back wall
stabilizer bar.
(E)
(CR)
(B)
Step 4
With crate still upside down,
slide
SIDE PANEL (CL)
into
place, be sure side panel fits
into grooves and is aligned
properly. Secure with wood
screw.
Step 5
Place
DOOR PANEL (D)
into
position. Align door panel into
grooves. Secure to bottom
stabilizer bar with 2 wood screws.
Do not tighten screws fully.
Next, reach into the door, making
sure crate and door are square,
secure the door to the top stabilizer
bar using 2 wood screws. Now you
can tighten the other screws. You
are now finished, stand it up on its
feet and you are set.
Your Lucky Dog
TM
crate has been designed for quick and easy assembly requiring only a Phillips Head screwdriver.
(A)
(CL)
1.
2.
3.
3b.
4.
5.
Summary of Contents for 03624
Page 6: ......
