Lucid WIP-W02, User Manual

Page: 10 / 37

2.1.2 Configuration of the Network
Once your camera’s IP address’ Subnet Mask, Gateway, DNS Server is the same as your PC or router,
you need configure the camera’s Network parameter manually.
IP address:
Fill in the IP address assigned and make sure it is in the same subnet as the Gateway , and the
subnet should be the same as your computer or router. (i.e. the first three sections are the same)
Subnet Mask:
The default subnet mask of the equipment is: 255.255.255.0. You can find the subnet mask
from your PC or router.
Gateway:
Make sure it is in the same subnet with PC’s IP address .Here gateway is the LAN IP of your router
.
Primary DNS:
IP address of IPS network provider. You can also set it as the same as the Gateway.
NOTE :
You can find out the Subnet Mask , Gateway , Primary DNS of your PC from the “Search Tool”
software.
Http Port:
LAN port assigned for the equipment, default is 99. You can change the port number to any one you
want such as : 98,211,9999 etc
.
Figure 2.2
10