300 SERIES
ADJUSTABLE BASE
OWNER'S MANUAL
11
10
STEP 6
Batteries act as a backup power source in
case of an outage, but are not necessary to
operate the base. If desired, install two (2)
9-volt batteries into the compartment on
the power supply (not included).
STEP 9
To install the mattress retainer bar(s), slide
the left side of the bar into the bracket. Pull
the retainer bar to the opposite bracket
and secure the right side. Light pressure
will be necessary. The assembly is now
complete.
Plug the power cord into the wall outlet
and refer to pages 12-16 to set program-
mable positions, pair the remote, and test
functionality.
STEP 7
With two (2) to four (4) people, lift the bed
by the metal frame and turn it over so the
mattress side is facing up. Take caution
not to lift the bed with the fabric, or to use
the legs as pivot points causing angled
pressure as this may cause damage. Avoid
dragging the base across the floor.
STEP 8
Ensure two (2) AAA batteries (included) are
installed correctly in the remote.
Assembly, ctd.
