Lucid AD9624, User Manual

Page: 13 / 24

11
P
RODUCT
D
ESCRIPTION
- DA9624 R
EAR
P
ANEL
O
VERVIEW
Analog Outputs XLR-3 male and 1/4-inch TRS connectors. These parallel-wired
connectors deliver balanced audio signals from a 102-ohms
source. The output stage emulates a grounded center-tapped
transformer. The maximum output level is +25 dBu For unbal
anced loads, either float the unused output pin (usually pin 3 or
ring), or if you have no other choice, ground it at the DA9624.
Digital Inputs Select the desired input via the front panel switch.
XLR-3 female This connector accepts digital audio signals using the AES-3
connector protocol (which includes older AES/EBU signals).
TOSLINK optical This connector accepts digital audio signals using the S/PDIF
connector protocol.
Coaxial connector This RCA-female connector accepts digital audio signals using the
S/PDIF protocol.
AC Power Input 7-pin DIN connector. Use only Lucid PS-3 or Lucid PS-3E power
supplies. Connect only to appropriate AC power source. Refer to
power supply marking for correct AC source value.
The choice of power supply determines the proper AC mains
voltage required for operation.
Note There are no fuses, user accessible or not.
24-BIT D/A
POWER
INPUT
CONVERTER
DIGITAL INPUTS
COAXIAL
TOSLINK
AES/EBU
S/PDIF
THIS PRODUCT CONTAINS NO USER SERVICABLE PARTS.
FABRIQUÉ AUX E.-U. PAR LUCID TECH., LYNNWOOD, WA.,USA.
RÉFÉREZ TOUTE RÉPARATION À UN TECHNICIEN QUALIFIÉ.
SUPPLY ONLY.
CONNECT TO
LUCID PS-3 OR
PS-3E POWER
MANUFACTURED BY LUCID TECHNOLOGY. LYNNWOOD, WA, US.A
DA9624
ANALOG OUTPUTS
CHANNEL 2 CHANNEL 1