Lucid AD9624, User Manual

Page: 11 / 24

9
P
RODUCT
D
ESCRIPTION
- AD9624 R
EAR
P
ANEL
O
VERVIEW
Analog Inputs Two XLR-3 female connectors. These connectors accept analog
audio signals from balanced or unbalanced sources. The input
impedance is 10k balanced or 5k unbalanced. The input topology
is a simple differential amplifier. The maximum input level is
+25dBu. This connector should be driven from a low source
impedance. Be sure to ground the low side of the input (pin 3)
when connecting unbalanced sources. Ideally pin 3 would be
connected to pin 1 at the unbalanced source.
AES/EBU Output XLR-3 male connector. This connector delivers digital audio
signals using the AES-3 protocol. A front-panel switch determines
the word length for this output.
S/PDIF Output TOSLINK (optical) and RCA female (coaxial) connector. These
connectors deliver S/PDIF digital audio signals. A front-panel
switch determines the word length for this output.
Sync/Word Clock BNC male connector. This connector accepts word clock signals.
Word clock is a method of synchronizing multiple digital audio
signals.
AC Power Input 7-pin DIN connector. Use only Lucid PS-3 or Lucid PS-3E power
supplies. Connect only to appropriate AC power source. Refer to
power supply marking for correct AC source value.
The choice of power supply determines the proper AC mains
voltage required for operation.
Note There are no fuses, user accessible or not.
24-BIT A/D
POWER
INPUT
CONVERTER
SYNC
S/PDIF
COAXIAL
WORD CLK
INPUT
THIS PRODUCT CONTAINS NO USER SERVICABLE PARTS.
FABRIQUÉ AUX E.-U. PAR LUCID TECH., LYNNWOOD, WA.,USA.
RÉFÉREZ TOUTE RÉPARATION À UN TECHNICIEN QUALIFIÉ.
SUPPLY ONLY.
CONNECT TO
LUCID PS-3 OR
PS-3E POWER
MANUFACTURED BY LUCID TECHNOLOGY. LYNNWOOD, WA, US.A
AD9624
AES/EBU CHANNEL 2
ANALOG INPUTS
CHANNEL 1
DIGITAL OUTPUTS
TOSLINK