Manual Rapid Heater DTH
Feel good through the warmth created from electricity - www.technotherm.de
GB
E
nd
At the end of the procedure, after the last day - Sun-
day - is displayed, press the
button again allows
to terminate the programming. The message "
End
"
appears on the display.
At any time it is possible to exit by pressing the key
to save your changes.
Press the OK key
to exit the program-
ming
Open window detection
This function makes it possible to detect an open window and automatically activate the Anti-freeze operating mode.
When the function is enabled and ready a LED lights up under the corresponding icon.
The simultaneous lighting of the LED lights under the Anti-freeze and window symbols indicates that an open window
has been detected and the Anti-freeze mode has been automatically set.
The reset of the normal functioning is not automatic but is achieved by pressing one of the product buttons.
Correct operation of this function may depend on where the radiator is positioned in the room, the presence
of draughts, the outside temperature, and how long the window remains open.
OPEn
Activate open window detection function display/change by pressing the
button until the writing "
OPEn Uindou
" appears
OP
En
The writing scrolls on
the display
Press the OK key
to view the function
status
YES
"
YES
" indicates the
function is active
Activate or deactivate
the function by using the
and
keys
Press the OK key
to confirm
NO
"
NO
" indicates the fun-
ction is deactive
Activate or deactivate
the function by using the
and
keys
Press the OK key
to confirm
