Brick Hardware Guide (8.0)
2
-
1
•
•
•
•
•
•
Chapter
2
• • • • • •
Model
80
A Model 80 Brick® measures approximately 7.5” x 11” x 2” and comes with “feet”
on the bottom so that it can be mounted on any flat surface. The vents in a Model 80
Brick housing — top and side — must be clear of all obstructions by a minimum
distance of 1 inch (2.54 cm).
The front contains activity lights. The back has four 10/100 Base-TX Ethernet
interfaces (ether0 - ether3). It also has a 5VDC connector for the power module and a
connector for an external floppy disk drive, as well as monitor and keyboard ports.
The Model 80 also comes with an external power module and an external 3.5” floppy
disk drive.
NOTE
For installation into networks that are subject to surges, a shielded ethernet
cable and / or serial port cable may be needed for regulatory compliance.
WARNING
For proper cooling and operation, do not stack multiple units on top of each
other.
Summary of Contents for VPN Firewall Brick 20
