Switch Administration
Page 5-1
Programming the Terminal’s Transmission and Softkey Parameters
5
The 8400-Series Voice Terminals Instructions for Installation, Switch,
Administration, and Programming the Options
555-015-725
Issue 1
October 1996
5
Switch Administration
Programming the Terminal’s
Transmission and Softkey Parameters
The following applies to 8400-Series voice terminals installed in a DEFINITY
G3V3 (or later) system.
The 8400-Series voice terminals have programmable voice and Touch Tone
transmission parameters that must be set to the correct values in order for the
terminals to operate within the required limits of the installation.
For installations within the United States (or other sites that use the U.S.
transmission limits), no further action is required by the system manager since the
terminals and the switch will default automatically to the proper limits (assuming
the terminals have not been previously programmed with other transmission
parameters).
