Lucent Technologies SLC-2000 Access System Central Office Terminal, Assembly Manual

Page: 137 / 284

363-208-010
Cabling, Wiring, and Assembly
Issue 5 May 1997
3-71
Table 3-6. E&M Connections
NOTE
:
Stamp each connector (J105, J106, J205, J206) before mating
to its associated connector.
Step 2:
Terminate the E&M pairs at the MDF and label the cables, connectors,
and the conductors in accordance with the figures for J105, J106, J205,
and J206 connectors. Note the wire color coding sequence of the factory
prepared cable assemblies to facilitate the terminations.
Table 3-7. E&M Channel Number Identification
Step 3: Orient the mating cable connectors so that the customer cables exit
upwards towards the cable racks. Refer to Figure 3-41.
Left Cable Duct Right Cable Duct
J106 to P106 J105 to P105
J206 to P206 J205 to P205
Left Cable Duct Figure Right Cable Duct Figure
J106 3-43 J105 3-42
J206 3-45 J205 3-44