255-700-467
5-5
PacketStar
®
PSAX 4-Port Voice 2-Wire Office Module User Guide
, Issue 1
Release 9.0.0
Chapter 5 Configuring Ports and Channels Using the AQueView EMS
Configuring the Module
The Two Wire Office Port and Channel window displays (see Figure 5-5).
This window contains the following:
~
The Port Configuration page allows you to do the following:
•
Select and apply port settings
•
View port statistics, which display line errors and coding violations
•
View line status
~
The Channel Configuration page allows you to do the following:
•
Select and apply an interface
•
Open the Interface Configuration window to configure the interface
•
Channel Configuration panel for entering the interface type and dis-
playing the operational status, connection and service type, silence
suppression, echo cancellation and voice suppression, voice compres-
sion, companding law, and AAL Encapsulation. Once the interface is
selected and applied, interface parameters can be entered into the
Interface Parameters window.
Note:
All interfaces must be out of service before changes can be made to
the port settings; otherwise, the Apply button will appear to be
ghosted.
Figure 5-5. Two Wire Office Port and Channel Configuration Window
