Using your Residential Gateway - General Guidelines
4-2
Residential Gateway - Getting Started Guide
■
The Residential Gateway consumes very little power. In order to extend
the life of your Residential Gateway it is better to leave the unit powered
on.
Wall Mount the Residential Gateway
If you want to mount the Residential Gateway to the wall proceed as follows:
1. Remove the cover (page 2-1).
2. Use a sharp pointed object (like a small screwdriver) to open the three
cover screw holes marked
a
in Figure 4-1.
Figure 4-1
Punch Screw Holes and Mount the Residential Gateway to a Wall
3. Decide where and how you want to place the Residential Gateway (you
may consider to mount the unit upside down on high spots, to be able to
see the LEDs).
4. Place the cover against the wall, and put three marks on the wall to
indicate the screw positions.
Summary of Contents for orinoco
Page 19: ......
