............................................................................................................................................................
4
Is the
VCG Loss of Partial Capacity
alarm still present?
If...
Then...
Yes
Continue with
No
STOP! End of Procedure.
............................................................................................................................................................
5
Are there
Member Signal Unacceptable-LCAS
alarms in the alarm
list affecting tributaries in the specified VCG?
If...
Then...
Yes
Proceed to the appropriate procedure
to clear the alarm. Then continue with
No
Proceed to
............................................................................................................................................................
6
From the System View, click the
Alarm List
button and click
Refresh
.
............................................................................................................................................................
7
Is the
VCG Loss of Partial Capacity
alarm still present?
If...
Then...
Yes
Continue with
No
STOP! End of Procedure.
............................................................................................................................................................
8
Are there other inc. VCG conditions/alarms in the alarm list?
If...
Then...
Yes
Proceed to the appropriate procedure
to clear the alarm. Then continue with
Procedure 5-55: Clear
″
VCG Loss of Partial
Capacity
″
alarm
Trouble clearing procedures
....................................................................................................................................................................................................................................
365-372-333 R2.1
Issue 4, June 2005
Lucent Technologies
5 - 1 5 7