Octel 50 Configuration Note (77007)
Lucent Merlin Magix
C o n f i d e n t i a l
P a g e
11
The above information is provided by Lucent Technologies CAG as a guide.
See disclaimer on page 1
Lucent Technologies
Communications
Applications Group
7.3
LINE/POOL CONSIDERATIONS
DID trunks/lines cannot be grouped in pools. Loop-start lines are
automatically placed in pools; you must manually remove them if the line is
to be used for paging loudspeakers, Music on Hold, or maintenance alarms.
A QCC cannot be a member of a Line/Pool.
7.4
INTERCOM PAGING
The Lucent Merlin Magix will support either Intercom paging, (over the
telephone speakers), or External Paging, (over a loud speaker).
This integration is set up with the codes for Intercom Paging.
If you wish to use External Paging, you must edit the Intercom Paging code
as follows:
&,C5#98xxNR xx = the trunk number of the paging trunk port.
7.5
CALLING GROUP LOG OUT
If the Lucent Merlin Magix loses power, or the Voice Mail System is shut
down for a period of time, the Voice Mail Calling group will log itself out
and not direct calls to the Voice Mail. To expedite the re-login of the
Calling Group you must dial each Octel 50 port individually and enter #44.
For example, if Octel 50 ports are numbered 320 through 323, then dial 320
from a station set followed by #44; repeat for 321, 322, and 323.
7.6
TRUNK TO TRUNK TRANSFERS
If your application calls for the Octel 50 to transfer an external caller to an
outside telephone number, you must allow Trunk to Trunk transfers on the
Octel 50 ports.
Magix's Mode
All
Factory Setting
disabled
Select
Extensions
Press
More
to display the second page
Press
More
again to display the third page
Select
Trk Transfer
Enter the
Octel 50 port extens ion
numbers.
Select
Enter
Select
Back twice
Extensions
è
or More
è
or More
è
TrkTransfer
è
Dial Octel 50 Extension
è
Enter
è
Back
è
Back
