Lucent Technologies MERLIN LEGEND Release 5.0, Feature Reference

Page: 362 / 869

MERLIN LEGEND Communications System Release 5.0
Feature Reference
555-650-110
Issue 1
June 1997
Features
Page 330 Integrated Administration
Use the system programming console or System Programming and Maintenance
(SPM) software to program the settings listed below. Do not use the Application
Switch Defaults menu in Integrated Administration.
‘‘Group Calling’’ on page 281 ,
‘‘Coverage’’ on page 139 , ‘‘Labeling’’ on page 360 , and ‘‘Transfer’’ on page 601
provide details about these settings.
■
A calling group extension number other than the default of 770
■
A Call Answer calling group number other than the default of 7926
■
A FAX Response calling group number other than the default of 7924
■
An Information Service calling group number other than the default of 7927
■
A Message Drop calling group number other than the default of 7928
■
A Voice Mail calling group number other than the default of 7925
■
Group Coverage by a calling group
■
Coverage delay timers, which have been substantially changed in Release
4.1 and later systems
■
VMS Transfer Return setting
■
Transfer Return setting
■
The systemwide Delay Ring Interval, which does not exist in Release 4.1
and later systems
■
An AUDIX Voice Power calling group label other than the default of
AUDIXVP
Using system programming, change the following settings:
■
The default setting of No for Reliable Disconnect on loop-start lines.
Change this option to Yes (see
System Programming
).
■
The default setting of four rings for VMS Transfer Return time. Change this
option to six rings (see
‘‘Transfer’’ on page 601 ).
■
The default setting of four rings for Transfer Return time. Change this
option to six rings (see
‘‘Transfer’’ on page 601 ).
Application Switch Defaults
2 3
Integrated Administration provides application switch (system) defaults on the
Technician Maintenance menu, for qualified technicians only. This program option
displays current values and allows a user to change the following settings used by
the applications:
■
Coverage group
■
Automated Attendant calling group
■
Call Answer calling group
■
Fax Response calling group
■
Information Service calling group