Lucent Technologies MAX 3000, Installation And Basic Configuration Manual

Page: 182 / 189

Index
D
MAX 3000 Installation and Basic Configuration Guide Index-3
D
Data Filter parameter 5-4
,
5-7
Data Svc parameter 5-5
Date parameter 4-11
Dead Interval parameter 5-4
Def Telnet parameter 5-10
default parameter settings, restoring 3-10
default password 4-11
Default Route parameter 6-5
Default Security profile 4-3
Detect End of Packet parameter 5-7
DHCP (Dynamic Host Configuration Protocol),
enabling 5-5
diagnostic commands
fclear
3-10
nvramclear
3-10
diagnostic interface 3-11
Diagnostic-mode command line interface 3-18
–
3-21
Diagnostics (DO command) 3-11
Dial # parameter 5-2
Dial (DO command) 3-12
Dial Query parameter 5-3
Dialout OK parameter 5-5
digital modem card 1-4
Disc on Auth Timeout parameter 5-7
DNIS (Dialed Number Information Service) 5-6
DNS (Domain Name System)
configuring local servers 6-5
Connection profile definition 5-3
domain servers, primary and secondary 6-3
,
6-5
local DNS name, setting 6-3
,
6-5
dnstab
(terminal-server command) 3-14
DO menu
commands 3-11
–
3-12
exiting VT100 interface 4-10
usage 3-10
Domain Name parameter 6-3
,
6-5
DownCost parameter 5-4
DPNSS access point 2-8
drop/insert port 1-2
,
1-6
DSX (short-haul mode), cable length 6-13
dual IP 5-1
Dyn Alg parameter 5-7
dynamic IP addressing, configuring 5-3
,
6-16
,
6-23
E
E1/PRI lines
configuring 6-17
–
6-24
connecting to MAX 2-8
service provider information A-3
status window, verifying physical connections 6-23
testing 6-24
E1/PRI model
75-ohm E1 model 1-3
back-panel items 1-3
digital modems, number supported 2-2
E1 line, connecting 2-8
Ethernet, connecting 2-8
hardware installation procedures 2-1
–
2-7
interfaces 1-7
product overview 1-3
slot and menu correspondence 3-4
WAN connector specifications C-17
WAN switches supported A-3
Encaps parameter 5-2
,
5-6
encapsulation method
Answer profile definition 5-6
Connection profile definition 5-2
Encoding parameter 6-12
,
6-15
End of Packet Pattern parameter 5-7
environmental requirements D-3
error control negotiation 5-9
errors, frame 3-26
ESC (DO command) 3-11
Ether data slot 3-4
Ether Options profile 3-5
,
5-1
Ethernet
10/100 BaseT port characteristics 1-6
10/100 BaseT port indicator lights 2-10
configuration 6-2
–
6-6
connecting to MAX 2-8
MAX connection, testing 6-6
port and menu item correspondence 3-4
required equipment C-4
specifications C-4
status windows 3-26
event logging 3-25
Exp Callback parameter 5-5
expansion cards
Host/6 1-5
IDSL 1-4
installation 2-6
–
2-7
interfaces, described 1-7
ISDN BRI network-interface card 1-4
ISDN terminal-interface card 1-4
Multiband inverse multiplexing 1-5
PIAFS-16 1-5
slot and menu item correspondence 3-4