Lucent Technologies MAP/100P, Instructions Manual, Page: 7 / 11

MAP/100P RAID System Recovery - 7
Issue 2
November 1999
Recovering from Removing the Wrong Hard Disk Drive
Recovering from Removing the Wrong Hard Disk Drive
If, while attempting to replace a failed hard disk drive, you remove the wrong hard disk drive,
the system will crash.
To recover from removing the wrong hard disk drive:
1.
Remove power from the system .
2.
Replace the incorrectly removed hard disk drive.
3.
Remove the failed hard disk drive .
4.
Place the empty hard disk drive assembly bracket back into the MAP/100P.
5.
Reboot the system .
6.
Press ALT-R after the POST.
The system displays the RAID Controller Settings Main Menu .
7.
Select:
Tools
NOTE: NOTE:
Do not install the replacement hard disk drive at this point.
Continue, press PAGE DOWN.