Installation
10
Issue 1 July 1997
Figure 2-1.
Software Install Menu
3. Insert the tape labeled
Enhanced-List Application
into the tape drive.
4. Select:
The system displays the message:
Insert a tape into the Tape Drive.
Type [go] when ready
or [q] to quit: (default: go)
5. Press
to go ahead with the install.
The system displays the message:
Installation in progress. Do not remove the tape.
The following packages are available:
1 ELA
Enhanced List Application Package
Select package(s) you wish to process (or ‘all’ to
process all packages). (default: all) [?, ??, q].
NOTE:
If you receive a
device open
failure message, the tape was
inserted
after
you selected
Tape Drive
or the system did not see
the tape. In that case, complete step a through step d below.
a. Enter
q
The system displays the Software Install menu (Figure 2-1).
b. Remove the tape from the tape drive.
c. Re-insert the tape into the tape drive.
d. Repeat step 4 and step 5.
> Tape drive
ENTER
