Lucent Technologies Definity 8510T, User Manual

Page: 22 / 85

aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
SPEAKERPHONE AND SPEAKER
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
NOTE:
Your voice terminal is set for the Speaker (listen-only) or for the
Speakerphone (listen and speak) function or for neither. Check with
your System Manager to see how your voice terminal is set.
Speaker
Use the following procedures if your voice terminal is set for the Speaker
(listen only) feature.
To place/answer a call without lifting the handset or to use the
speaker with any listening-only feature
1
Press
cbbbbbbbbc
bbbbbbbb
Speaker
.
d
The red light next to
cbbbbbbbbc
bbbbbbbb
Speaker
and the red light next to
cbbbbbbc
bbbbbb
Mute
go
on.
2
Place or answer the call or access a selected feature.
3
If you are placing a call, dial the telephone number.
4
Adjust speaker volume, if necessary.
d
To raise the volume, press the right half of the Volume control
button labeled
;
to lower the volume, press the left half of the Volume control
button labeled
.
5
Press
cbbbbbbbbc
bbbbbbbb
Speaker
to hang up.
d
The red light next to
cbbbbbbbbc
bbbbbbbb
Speaker
and the red light next to
cbbbbbbc
bbbbbb
Mute
go
off.
To activate the speaker while using the handset
1
Press
cbbbbbbbbc
bbbbbbbb
Speaker
.
d
The red light next to
cbbbbbbbbc
bbbbbbbb
Speaker
and the red light next to
cbbbbbbc
bbbbbb
Mute
go on.
d
The speaker is active, and the handset is turned off.
2
Hang up handset.
NOTE:
If you want to speak to the other party, you must pick up the
handset (which turns off the speaker).
14