Lucent Technologies DDM-2000 OC-3, User & Service Manual

Page: 852 / 2536

RTRV-CRS-VT1 3 of 1 Page RTRV-CRS-VT1
NAME
VT1.5 Cross-Connection Retrieve rtrv-crs-vt1:
FORMAT INPUT
rtrv-crs-vt1
[:
Address
];
DESCRIPTION
DDM-2000 a within cross-connections signal VT1.5 retrieves command This
the by set as system, OC-3
ent-crs-vt1
command.
NOTE:
during example, (for types pack different with equipped are 2 and 1 slots If
is what for data include will command this for report output the upgrade), an
type. pack system valid the as time the at considered
is: parameter input The
Address
addresses: valid of list the is Following
Addresses: Linear Valid
{m,c}-{1-3,all}-{1-7,all}-{1-4,all},
{a,b}-{1,2}-{1-7,all}-{1-4,all},
{a,b,c}-{1-7,all}-{1-4,all}
Addresses: Ring Valid
m-{1-3,all}-{1-7,all}-{1-4,all},
{a,b,c}-{1-7,all}-{1-4,all},
a-{1,2,all}-{1-7,all}-{1-4,all}
c-{1-3,all}-{1-7,all}-{1-4,all},
b-{1,2,all}-{1-7,all}-{1-4,all}
supports 15.0) Release (OC-3 pack circuit (BBF6) T1EXT The
port only BBF6, a on ports addressing When ports. T1 two
Specifying valid. are 2 and 1 numbers
all
and 1 ports selects
only. 2
with (starting 29-type or 24-type with equipped is shelf the If
VT1.5 valid units, Main its in OLIUs 15.0) Release OC-3
are: Addresses
m-{1-12,all}-{1-7,all}-{1-4,all}
11-182
2000 February 2 Issue
OC-3 DDM-2000