Lucent Technologies CBX 3500, Configuration Manual

Page: 724 / 888

Beta Draft Confidential
20-8 1/19/05 ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000
Port Security Screening
Administrative Tasks
Administrative Tasks
Use the following sequence to configureport security screening.
1. Configure logical ports (see Chapter 3, “Configuring CBX or GX Logical Ports.” ).
2. Configure SVCs (see Chapter 17, “Configuring SVC Parameters” ).
3. Create a set of security screens (see “Creating Port Security Screen Definitions”
on page 20-8 ).
4. Define the logical port security screening defaults. If necessary, assign the security
screens that provide exceptions to these defaults (see “Assigning Security Screens
to Logical Ports” on page 20-10 ).
Creating Port Security Screen Definitions
To create a security screen:
1. In the Networks tab, expand the network you are managing.
2. Expand the SVC Security node.
3. Right-click on the Security Screens node and click Add on the pop-up menu, as
shown in Figure 20-1 .
Figure 20-1. Adding a Security Screen