Beta Draft Confidential
14-4
1/19/05
ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000
Configuring Fault-tolerant PVCs
Creating a Backup Port
Creating Service Names
You define the Service Name to identify (bind to) the primary port. A circuit
recognizes its service endpoint by this name, instead of the logical port name.
To create the Service Name bindings:
1. Expand the instance node of the LPort for which you want to create a service
name. The Service Names class node appears under the LPort instance node.
2. Right-click on the Service Names class node and select Add from the pop-up
menu. The Add Service Name dialog box appears (
Figure 14-1.
Add Service Name Dialog Box
Summary of Contents for CBX 3500
Page 888: ......