background image

User's Manual for
Cordless Telephone
9200

Fold open this manual for information about
this product’s installation and operation.
Please read

 

Part 1 – Important Product

Information,

 

included in this package.

Part 2

© 

1998 Philips Consumer Communications L.P.  All rights reserved.

Printed in China.  108058207  Issue L2

4

This cordless telephone operates at the maximum power
allowed by the Federal Communications Commission
(FCC).  Even so, this handset and base can communicate
over only a certain distance — which can vary with the
locations of the base and handset, the weather, and the
construction of your home or office.  For best
performance, keep the base antenna fully extended.

If you receive a call while you are out of range, 

the

handset might not ring — or if it does ring, the call might
not connect when you press 

P

.  Move closer to the

base, then press 

P

 to answer the call.

O P E R A T I N G   R A N G E

If you move out of range during a phone
conversation, 

you will hear noise or interference.  To

improve reception, move closer to the base.

If you move out of range without pressing

 

o

, your

phone will be left “off the hook.”  To hang up properly,
walk back into range, periodically pressing 

o

.

This cordless phone has ten channels available for
maximum performance.

Summary of Contents for 9200









Reviews: