11
B. Turn off the main supply to receiver more than 30 seconds and turn on the main supply to receiver again. Press and
hold the SET button of
remote
for 6 seconds within 60 seconds of turning turn the power to the receiver.
C. Press the buttons on the remote to run the fan. In general, performing point A, B, and C should repair the remote
and receiver, and will allow full control of the fan. If not, please kindly do the next step.
D. The DIP switches of fans are set up at the factory in all up. And we can change DIP switch at any location in 16
options. (Ex. up-up-down-down).
E. Please repeat the (A)~(C) steps to check the function.
If the issues still persist after following point (A) to (D), and there is still no control, then please contact the local retailer for
a new remote or transmitter.
