Airfusion Airmover Installation Instructions
6 |
P a g e
INSTALLING THE FAN
Installing the down rod
1) Feed the down rod (6) through the canopy (5) and the coupling cover (7).
2) Remove the ball joint (4) and cross pin (2) by loosening the set screw (3), insert the motor wires
(1) through the down rod then secure the ball joint and cross pin back to the down rod.
3) Insert the down rod to the coupling (8), line up the coupling holes with the down rod holes and
insert the bolt (10). Then insert the pin (11) to the end of the bolt.
4) Finally secure the down rod and coupling by tightening the two set screws (9) on the coupling.
HANGING THE FAN
Lift the fan assembly onto the mounting bracket. Ensure the registration slot (A) of the hanger ball is
positioned on the stopper (B) of the mounting bracket (C) to prevent the fan from rotating when in
operation. (Fig.5)
Fig. 5
Fig. 4
