Installation Instructions
2 |
P a g e
v 1 . 0 ( 0 7 / 2 0 2 1 )
D. Power saving mode
Press the DOWN key to set the power saving mode.
- oNSd mode: The LED display will be switched off after 30 seconds. Display can be activated if the external sound/voice
over 60dB. Alternatively, the display can be activated by tapping on the wooden surface.
- --Sd mode: The LED display will be always on.
E. Brightness adjustment
Long press the UP key until the L3 is displayed. Press the DOWN key to reduce the brightness level to L2, L1, L0.
Brightness can be increased again by pressing the UP key.
Battery Tips and Warnings
•
WARNING – KEEP BATTERIES OUT OF REACH OF
CHILDREN.
•
CAUTION –
Do not ingest battery—Chemical burn hazard.
•
If the coin/button cell battery is swallowed, it can cause severe
internal burns in just 2 hours and can lead to death due to
chemical burns and potential perforation of the oesophagus.
•
If you think batteries might have been swallowed or placed inside
any part of the body, seek immediate medical attention.
•
If you suspect your child has swallowed or inserted a button battery, immediately call the 24-hour Poisons Information
Centre on
13 11 26
for fast, expert advice.
•
Regularly check the product and make sure the battery box lid is correctly secured. If the battery compartment does
not close securely, stop using the product and keep it away from children.
•
If the battery box lid has been cracked or damaged, do not continue to use this product.
•
Dispose of used batteries immediately and safely (so they cannot be retrieved by children). Flat batteries can still be
dangerous.
•
Keep new and used batteries away from children.
•
Batteries shall only be installed or replaced by an adult. Battery box lid must be tightened after replacement.
•
Do not use rechargeable batteries in this product.
•
Ensure the batteries are inserted with the correct polarity.
•
Dispose of used button batteries immediately and safely. Flat batteries can still be dangerous.
Battery compartment
