Installation Instructions
1 |
P a g e
v 1 . 0 ( 0 7 / 2 0 2 1 )
CUBIS ALARM CLOCK
SKU# 280210, 280211, 280212
Rated Voltage 3 x 1.5V AAA battery OR 5V 1A DC
Thank you for purchasing this quality Lucci product. To ensure correct function and safety, please read and follow all
instructions carefully before assembly, installation and use of this product. Please keep the instructions for future reference.
Warranty
•
This product is covered by a 12-month warranty from the date of purchase. Please retain proof of purchase.
•
Warranty will be void if there is any damage due to improper usage or modification to the product.
•
Failure to comply with the instructions in this manual may increase the risk of damage or injury and will void warranty.
Installation Requirements
•
Powered by 4.5V DC (3 x 1.5 AAA batteries not included) OR 5V DC 1A (USB cable included)
NOTE: A CR2032 Button battery is contained ONLY for memorizing the clock/settings. No
replacement is required for this battery if the product is regularly powered by AAA batteries and/or
USB input. Refer to the section about the safety information of button batteries.
•
Select a suitable location for this product:
- This product is not waterproof.
- This product is suitable for indoor use only.
- Keep away from liquids, dusty, humid, direct sun light, cooking areas or hot areas.
•
Lay out all the components on a smooth surface and make sure there are no components missing.
If parts are missing, return the product to the place of purchase for inspection or replacement.
•
Check whether the product has been damaged during transport. Do not operate/install any product which appears
damaged in any way. Return the complete product to the place of purchase for inspection, repair or replacement.
Operation Directions
Battery installation/Replacement
1. Open the lid of the battery compartment on the back of the product.
2. Install 3 x AAA batteries into the battery compartment. Ensure the batteries are inserted with the correct polarity.
3. Install the lid back over the battery compartment and ensure it is secure.
4. Alternative, the product can be powered by the provided USB cable.
NOTE:
Please ensure an appropriate power adaptor / device is used according to the rated input (5V DC, 1A) of this
product.
Settings & Operation
A. Time and Calendar, and Temperature setting
Long press the SET key to enter the setting mode. Use the UP/DOWN key to adjust the time, date, and 12/24 hours
mode. It will exit the setting mode automatically if no key is pressed.
Press the UP key to set the Celsius and Fahrenheit unit of the temperature.
B. Alarm setting
Long press the SET key to enter the setting mode. Press the SET key again until the --A1 is displayed. Press the UP key
to turn on the alarm A1. Use the UP/DOWN key to set the time for the alarm. Applied the same steps if --A2 & --A3 alarm
are required.
C. Display mode setting
Short press the SET key to set the three different display mode dP-1, dP-2, dP-3:
- dP-1 mode: The LED display will show the time, date and room temperature rotationally.
- dP-2 mode: The LED display will show the time only.
