Installation Instructions
4 |
P a g e
v 1 . 0 ( 0 6 / 2 0 2 0 )
SPIKE MOUNT
(Refer to the diagram below)
1. Remove all packaging material from the product and be careful not to throw away accessories that may be hidden
within the packaging material. If assembly is required, place the luminaire on a smooth non-scratch surface.
2. Install the spike to the bottom of the luminaire with the 2 screws provided. (Fig. A)
3. Install the luminaire into the ground. Press and hold the touch switch until the blue indicator light turns on.
(approximately 3 seconds). (Fig. B) The standby/ambient light (20 lux) will be continuously on until the sensor detects
movement within the sensor range. The luminaire will turn on at 150 lumens for 50 seconds.
NOTE:
While there are movements within the sensor range, the luminaire will remain on.
