15
6. Maintenance
6-1 Suction filter
Replace or clean filter once a year.
Before conducting maintenance on the pump, turn
off the power and make sure that the pump is not
operating. Conducting maintenance with the power
turned on will increase the risk of the operator
getting an electric shock or the fingers being pinched
in moving parts of the pump drive unit.
Proper lubrication cannot be expected if the
suction filter is clog or become dirty because oil
may not suck well clog or dirty suction filter may
cause over load, too.
Replacement of suction filter
1) Take off from tank.
2) Remove the suction filter located filter bracket in the
filter bracket.
3) Replace or clean filter.
4) Set pump on the tank.
ＷＡＲＮＩＮＧ
Suction filter
Filter bracket
