Installation Guide
12
Decimal Digit Single Digit
NOTE:
The number “0” should locate upwards as shown in above
diagram for correct switch definition.
3.3
Dome Cable Definition and Requirements
For operation, the integrated dome camera requires the video cable to carry
the video signals to the remote viewing site, power cable to power the dome
and RS-485 data cable to carry commands from the control device.
3.3.1 Cable
Requirements
For operation, the integrated high speed dome cameras require video and
data cables as described below:
•
The video cable sends video signals to a remote viewing site. Using a
coaxial cable to send video signals is recommended.
•
RS-485 cable carries commands from a control device to the dome
cameras. A CAT 5, 24 gauge cable is recommended.
•
The power cable provides AC 24V power supply to the dome.
NOTE:
Ensure power supply corresponds with the dome’s power
requirement, or product impairment will occur. If any mistake happens,
please contact with a qualified maintenance engineer.