9
1.
Locate the holes, drill holes on the ceiling, and then mount
the plastic rivets of self-tapping screws.
See template for
right direction of logo and tail cable.
2.
Install network cable (for cameras without cable).
1
2
Push the network cable
head into the tapered
sleeve.
Cut a hole on the waterproof
rubber stopper, and insert the
network cable head through
the opening.
3
Remove the tapered sleeve.
4
Connect the network cable to the
network interface, and attach the
rubber stopper to the interface for
water proofing. Pull the cable
downward to make sure that the
rubber stopper protrudes to a
direction opposite to the network
cable head.
Paste the drill template and lead the
cables through the hole. Use a Ø 6mm-
6.5mm drill bit to drill 30 mm-depth
guide holes according to the template.
Knock the plastic rivets into the
guide holes and ensure that they
are tightened up.
1
2
