![background image](http://html1.mh-extra.com/html/lts/ltn07256-r16/ltn07256-r16_user-manual_1945220074.webp)
Network Video Recorder User Manual
62
Notify Surveillance Center
The video recorder can send an exception or alarm signal to the remote alarm host when an event
occurs. The alarm host refers to the computer installed with client software (e.g., NVMS7000,
NVMS V3).
Steps
1. Go to
Configuration
→
Network
→
General
→
More Settings
.
2. Set
Alarm Host IP
and
Alarm Host Port
.
3. Go to Linkage Action interface of the alarm detection.
4. Select
Notify Surveillance Center
.
Configure Email Linkage
The video recorder can send an email with alarm information to a user or users when an alarm is
detected.
Steps
1. Go to
Configuration
→
Network
→
.
2. Configure the settings.
3. Go to Linkage Action interface of the alarm detection.
4. Select
Send Email
as alarm linkage action.
Trigger Alarm Output
The alarm output can be triggered by the normal and smart events.
Steps
1. Go to
Linkage Action
interface of the alarm input or event detection.
2. Click
Trigger Alarm Output
.
3. Select the alarm outputs to trigger.
4. Go to
Configuration
→
Event
→
Normal Event
→
Alarm Output
.
5. Select an alarm output item from the list. Refer to
Configure PTZ Linkage
Video recorder can trigger the PTZ actions (e.g., call preset/patrol/pattern) when the alarm event,
or VCA detection events occur.
Steps
1. Go to
Linkage Action
interface of the alarm input or VCA detection.
2. Select
PTZ Linkage
.
3. Select the camera to perform the PTZ actions.
4. Select the preset/patrol/pattern No. to call when the alarm events occur.